Kobelco DW-N625 Flux cored wire

Name: Flux cored wire
Brand: Kobelco

Kobelco · Model DW-N625

DW-N625

Request a quotation

Kobelco Flux cored wire

DW-N625 Flux cored wire. Suitable for Ni-based alloy of 625, dissimilar-metal joints and overlaying

Official model: DW-N625

Required quantityEnquire on WhatsApp

Pricing, model selection, stock and delivery are confirmed in your quotation.

Individual manufacturer designation and recorded specifications sourced from the official OEM website on 10 October 2026. Supply terms, regional configuration and application suitability are confirmed by quotation. The source does not publish a separate article SKU for this record. OEM photograph unavailable; the image is explicitly labelled model-reference artwork.

Technical information

Features	Suitable for Ni-based alloy of 625, dissimilar-metal joints and overlaying
Classification	AWS A5.34 ENiCrMo3T1-1/4
Shielding gas	Ar-CO 2 , CO 2
Polarity	DCEP
Packaging data	φ mm \| Spool; 1.2 \| 12.5kg; Vollume mm \| 259W, 110H, 295L
Composition (all-weld metal mass %)	\| Typical (Ar-CO 2 ) \| Guaranty a; C \| 0.03 \| 0.10; Si \| 0.37 \| 0.50; Mn \| 0.28 \| 0.50; P \| 0.01 \| 0.02; S \| 0.003 \| 0.015; Ni \| 63.3 \| 58.0min.; Cr \| 21.6 \| 20.0-23.0; Mo \| 8.6 \| 8.0-10.0; Cu \| 0.01 \| 0.50; Fe \| 1.8 \| 5.0; Nb+Ta \| 3.57 \| 3.15-4.15; Ti \| 0.11 \| 0.40; Note: a Single values are maximium.
Welding parameters (A)	φ mm \| 1F, 1G, 2F, 2G \| 3G uphill; 1.2 \| 150-210 \| 130-180
All-weld mechanical properties	\| Typical \| Guaranty; 0.2%YS (MPa) \| 472 \| -; TS (MPa) \| 752 \| 690min.; EI on 4d (%) \| 38 \| 25min.; IV 0°C (J) \| 67 \| -
Approvals / Click here for certificates	ABS \| MG; BV \| UP (ENiCrMo3T1-4); Note: Ar-CO 2