Kobelco MG-SN82 Solid wire

Name: Solid wire
Brand: Kobelco

Kobelco · Model MG-SN82

MG-SN82

Request a quotation

Kobelco Solid wire

MG-SN82 Solid wire. Inconel 82 type filler wire Suitable for Inconel, Incoloy, dissimilar-metal joints and overlaying on carbon steel

Official model: MG-SN82

Required quantityEnquire on WhatsApp

Pricing, model selection, stock and delivery are confirmed in your quotation.

Individual manufacturer designation and recorded specifications sourced from the official OEM website on 10 October 2026. Supply terms, regional configuration and application suitability are confirmed by quotation. The source does not publish a separate article SKU for this record. OEM photograph unavailable; the image is explicitly labelled model-reference artwork.

Technical information

Features	Inconel 82 type filler wire Suitable for Inconel, Incoloy, dissimilar-metal joints and overlaying on carbon steel
Classification	AWS A5.14 ERNiCr-3
Shielding gas	Ar, Ar-2%O2
Polarity	DCEP
Packaging data	\| Spool; φ mm \| kg; 1.0 \| 1, 5, 15; 1.2 \| 1, 5, 15; 1.6 \| 1, 5, 15; Volume mm \| 1kg: 16.5d, 100D, 45W; d:innerφ \| 5kg: 50.5d, 200D, 55W; D:outerφ \| 15kg: 51.5d, 300D, 103W
Composition (rod and wire mass%)	\| Typical \| Guaranty a; C \| 0.01 \| 0.10; Si \| 0.04 \| 0.50; Mn \| 3.1 \| 2.5-3.5; P \| <0.01 \| 0.03; S \| 0.002 \| 0.015; Cu \| 0.01 \| 0.50; Ni \| 72.5 \| 67.0min.; Cr \| 20.8 \| 18.0-22.0; Nb+Ta \| 2.7 \| 2.0-3.0; Ti \| 0.33 \| 0.75; Fe \| 0.4 \| 3.0; Note: a Single values are maximium.
All-weld mechanical properties	\| Typical; 0.2%YS (MPa) \| 370; TS (MPa) \| 630; EI on 4d (%) \| 55
Welding parameters	φ mm \| ; 1.0 \| ?; 1.2 \| 80-200; 1.6 \| ?