Kobelco TG-S308L Welding consumable

Name: Welding consumable
Brand: Kobelco

Kobelco · Model TG-S308L

TG-S308L

Request a quotation

Kobelco Welding consumable

TG-S308L Welding consumable. Suitable for low carbon 18%Cr-8%Ni steel

Official model: TG-S308L

Required quantityEnquire on WhatsApp

Pricing, model selection, stock and delivery are confirmed in your quotation.

Individual manufacturer designation and recorded specifications sourced from the official OEM website on 10 October 2026. Supply terms, regional configuration and application suitability are confirmed by quotation. The source does not publish a separate article SKU for this record. OEM photograph unavailable; the image is explicitly labelled model-reference artwork.

Technical information

Features	Suitable for low carbon 18%Cr-8%Ni steel
Classification	AWS A5.9 ER308L
Shielding gas	Ar
Identification color	1st Red
Polarity	DCEN
Packaging data	\| Spool \| Tube; φ mm \| kg \| kg \| Length mm \| g/piece; 0.8 \| 10 \| 5 \| 1,000 \| 4; 1.0 \| 10 \| 5 \| 1,000 \| 6; 1.2 \| 10 \| 5 \| 1,000 \| 9; 1.6 \| 10 \| 5 \| 1,000 \| 16; 2.0 \| - \| 5 \| 1,000 \| 25; 2.4 \| - \| 5 \| 1,000 \| 36; 3.2 \| - \| 5 \| 1,000 \| 64; Volume mm \| 240W, 110H, 240L \| 40W, 35H, 1015L
Composition (rod and wire mass%)	\| Typical \| Guaranty a; C \| 0.01 \| 0.03; Si \| 0.37 \| 0.30-0.65; Mn \| 1.8 \| 1.0-2.5; P \| 0.02 \| 0.03; S \| <0.01 \| 0.03; Ni \| 10.1 \| 9.0-11.0; Cr \| 19.8 \| 19.5-22.0; Mo \| 0.07 \| 0.75; Cu \| 0.08 \| 0.75; Note: a Single values are maximium.
Welding parameters (A)	φ mm \| ; 0.8 \| 50-80; 1.0 \| 50-80; 1.2 \| 50-100; 1.6 \| 100-200; 2.0 \| 100-200; 2.4 \| 150-250; 3.2 \| 200-300
All-weld mechanical properties	\| Typical; 0.2%YS (MPa) \| 420; TS (MPa) \| 590; EI on 4d (%) \| 45; IV -196°C (J) \| 78
Approvals / Click here for certificates	ABS \| MG(AWS A5.9 ER308L); LR \| 304L m(Chem&Cryo); DNV \| VL308L,MG; BV \| 308LBT; NK \| KY308L